Basic Tools for Network Engineers
Basic networking tools are the commands and utilities used to see what a network is doing: ping, traceroute, nslookup or dig, ip, ss, curl and packet capture with Wireshark or tcpdump. Paired with Linux shell skills, they let an engineer test each layer and isolate faults.
Stage: Networking Foundations · Part of the Network Engineer roadmap · Last reviewed 19 November 2026
What to learn in Basic Tools
- Use ping and traceroute to locate where packets stop
- Query DNS records with dig and compare answers from different resolvers
- List listening ports and connections using ss
- Capture traffic with tcpdump and filter it in Wireshark
- Navigate Linux, edit files and read logs from the shell
Basic Tools interview questions
What does traceroute actually measure?
Traceroute sends packets with increasing TTL values so each router on the path replies with a time exceeded message. This reveals each hop and its round-trip time. Some routers rate-limit or block these replies, which shows as stars.
A website will not load but ping to its IP works. What next?
Network reachability is fine, so check DNS resolution with dig, then the TCP port with curl -v or nc, then TLS and the application response. Firewalls often allow ICMP but block specific ports.
Where Basic Tools fits in the Network Engineer roadmap
Basic Tools belongs to the Networking Foundations stage (beginner level), which takes about 5 hours. The language of networks.
Other units in this stage
Back to the full Network Engineer roadmap